ZyXEL Communications MAX-200M1 Series, Руководство пользователя

Страница: 119 / 258

ZyXEL MAX-200M1 Series User’s Guide
Chapter 10 SIP 119
10.2.3 SIP QoS Screen
Use this screen to maintain ToS and VLAN settings for the ZyXEL Device. To access this
screen, click
VoIP > SIP > QoS .
MWI (Message
Waiting Indication)
Enable Select this if you want to hear a waiting (beeping) dial tone on your phone when
you have at least one voice message. Your VoIP service provider must support this
feature.
Expiration Time Keep the default value, unless your VoIP service provider tells you to change it.
Enter the number of seconds the SIP server should provide the message waiting
service each time the ZyXEL Device subscribes to the service. Before this time
passes, the ZyXEL Device automatically subscribes again.
Fax Option This field controls how the ZyXEL Device handles fax messages.
G.711 Fax
Passthrough
Select this if the ZyXEL Device should use G.711 to send fax messages. The peer
devices must also use G.711.
T.38 Fax Relay Select this if the ZyXEL Device should send fax messages as UDP or TCP/IP
packets through IP networks. This provides better quality, but it may have inter-
operability problems. The peer devices must also use T.38.
Call Forward
Call Forward Table Select which call forwarding table you want the ZyXEL Device to use for incoming
calls. You set up these tables in VoIP > Phone Book > Incoming Call Policy .
Caller Ringing
Enable Check this box if you want people to hear a customized recording when they call
you.
Caller Ringing
Tone
Select the tone you want people to hear when they call you. See Section 10.1.11
on page 111 for information on how to record these tones.
On Hold
Enable Check this box if you want people to hear a customized recording when you put
them on hold.
On Hold Tone Select the tone you want people to hear when you put them on hold. See Section
10.1.11 on page 111 for information on how to record these tones.
<Back Click this to return to the SIP Settings screen without saving your changes.
Apply Click this to save your changes.
Cancel Click this to set every field in this screen to its last-saved value.
Table 34 VoIP > SIP > SIP Settings > Advanced
LABEL DESCRIPTION