ZyXEL Communications MAX-200M1 Series, Руководство пользователя

Страница: 229 / 258

ZyXEL MAX-200M1 Series User’s Guide
Appendix C 229
• If you have a static IP address click Use the following IP Address
and fill in the IP address , Subnet mask , and Default gateway fields.
• Click Advanced .
Figure 137 Windows XP: Internet Protocol (TCP/IP) Properties
6 If you do not know your gateway's IP address, remove any previously installed gateways
in the
IP Settings tab and click OK .
Do one or more of the following if you want to configure additional IP addresses:
• In the IP Settings tab, in IP addresses, click Add .
• In TCP/IP Address , type an IP address in IP address and a subnet
mask in Subnet mask , and then click Add .
• Repeat the above two steps for each IP address you want to add.
• Configure additional default gateways in the IP Settings tab by
clicking Add in Default gateways .
• In TCP/IP Gateway Address , type the IP address of the default
gateway in Gateway . To manually configure a default metric (the
number of transmission hops), clear the Automatic metric check box
and type a metric in Metric .
• Click Add .
• Repeat the previous three steps for each default gateway you want to
add.
• Click OK when finished.