ZyXEL Communications MAX-200HW2, Руководство пользователя

Страница: 63 / 150

Chapter 4 Internet Setup Wizard
MAX-200HW2 Series User ’ s Guide
65
4.4.3 Extend (WPA-PSK or WPA2-PSK) Security
Choose Extend (WPA-PSK) or Extend (WPA2-PSK) security in the Wireless LAN setup
screen to set up a Pre-Shared Key .
Figure 31 Wizard > Step 2 > Extend (WPA-PSK or WPA2-PSK) Security
The following table describes the labels in this screen.
4.4.4 The OTIST Screen
After configuring your security settings or choosing Auto or None the OTIST screen will
display.
You must enable OTIST if you have selected
Auto . For the other security types you may click
No if you do not plan to use OTIST. OTIST is only compatible with certain wireless devices,
please check your other device ’ s documentation to see if it supports OTIST. For more
information on OTIST see Section 7.4 on page 101 .
Key 1 to Key 4 The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
If you chose 64-bit WEP , then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP , then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
You must configure at least one key, only one key can be activated at any one time.
The default key is key 1.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen. Proceed to Section 4.4.4 on page 65 .
Exit Click Exit to close the wizard screen without saving.
Table 9 Wizard > Step 2 > Basic (WEP) Security
LABEL DESCRIPTION
Table 10 Wizard > Step 2 > Extend (WPA-PSK or WPA2-PSK) Security
LABEL DESCRIPTION
Pre-Shared
Key
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen. Proceed to
Exit Click Exit to close the wizard screen without saving.