ZyXEL Communications MAX-200HW2, Руководство пользователя

Страница: 60 / 150

Chapter 4 Internet Setup Wizard
MAX-200HW2 Series User ’ s Guide
62
Figure 27 Connection Wizard: Introduction
4.3 Step One: System Information
In the next screen you can give your ZyXEL Device a name (optional) in the System Name
field. Enter up to thirty letters (this field is case-sensitive) or numbers. The ‘ at ’ symbol (@),
dash (-), underscore (_) and period (.) are also permitted. Enter your ISP ’ s IP address in the
Domain Name
field if your ISP has instructed you to do so, or if you are having trouble
accessing the Internet. Otherwise, leave this field blank. Click Next .
Figure 28 Wizard > Step 1 > System Information
The following table describes the labels in this screen.
Table 7 Wizard > Step 1 > System Information
LABEL DESCRIPTION
System Name System Name is a unique name to identify the ZyXEL Device in an Ethernet network.
Enter a descriptive name. This name can be up to 30 alphanumeric characters long.
Spaces are not allowed, but dashes "-" and underscores "_" are accepted.
Domain Name Type the domain name (if you know it) here. If you leave this field blank, the ISP may
assign a domain name via DHCP. The domain name entered by you is given priority
over the ISP assigned domain name.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click
Exit
to close the wizard screen without saving.