ZyXEL Communications LTE6100, Руководство пользователя

Страница: 73 / 189

Chapter 10 Firewall
LTE6100 User’s Guide
73
Each field is described in the following table.
10.4 The Access Control Screen
Click Security > Firewall > Access Control to display the following screen. This screen displays a
list of the configured incoming or outgoing filtering rules.
Figure 41
Security > Firewall > Access Control
Each field is described in the following table.
Table 29
Security > Firewall > Services > Add New Service Entry
LABEL DESCRIPTION
Name Type a descriptive name for the service.
Type Select the protocol type (TCP, UDP or ICMP or Others) of the service.
Protocol
Number Enter the protocol number of the service type.
Source Port,
Destination
Port The source port defines from which port number(s) the service traffic is sent. The
destination port defines the port number(s) the destination hosts use to receive the service
traffic.
Select Single if the service uses one and only one source or destination port, then enter the
port number.
Select Multiple if the service uses two or more source or destination ports, then enter a
port range. For example, suppose you want to define the Gnutella service. Select TCP type
and enter a port range of 6345-6349.
Apply Click Apply to save your changes.
Back Click Back to exit this screen without saving your changes.
Table 30
Security > Firewall > Access Control
LABEL DESCRIPTION
Rules Storage
Space usage(%) This bar shows the percentage of the LTE Device’s space has been used. If the usage is
almost full, you may need to remove an existing filter rule before you create a new one.
Add new ACL rule Click this to go to add a filter rule for incoming or outgoing IP traffic.
Name This displays the name of the rule.
Src IP This displays the source IP addresses to which this rule applies. Please note that a blank
source address is equivalent to Any.
Dst IP This displays the destination IP addresses to which this rule applies. Please note that a
blank destination address is equivalent to Any.
Services This displays the protocol type and a port range that define the service to which this rule
applies.