ZyXEL Communications LTE6100, Руководство пользователя

Страница: 50 / 189

Chapter 7 Quality of Service (QoS)
LTE6100 User’s Guide
50
CoS technology includes DiffServ (Differentiated Services or DS). DiffServ is a new protocol and
defines a new DS field, which replaces the eight-bit ToS (Type of Service) field in the IP header.
Tagging and Marking
In a QoS class, you can configure whether to add or change the DSCP (DiffServ Code Point) value in
a matched packet. When the packet passes through a compatible network, the networking device,
such as a backbone switch, can provide specific treatment or service based on the tag or marker.
7.2 The QoS General Screen
Use this screen to enable or disable QoS, set the bandwidth, and select to have the LTE Device
automatically assign priority to upstream traffic according to the IP precedence or packet length.
Click Network Setting > QoS to open the General screen.
Figure 24
Network Setting > QoS > General
The following table describes the labels in this screen.
Table 15
Network Setting > QoS > General
LABEL DESCRIPTION
Active QoS Select the check box to turn on QoS to improve your network performance.
You can give priority to traffic that the LTE Device forwards out through the WAN interface.
Give high priority to voice and video to make them run more smoothly. Similarly, give low
priority to many large file downloads so that they do not reduce the quality of other
applications.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.