Chapter 6 Router
LTE4506 User’s Guide
52
Fig ure 31
Router > DHCP Server
The following table describes the labels in this screen.
Table 23 Router > DHCP Server
LABEL
DESC RIPTIO N
DHCP Settings
Enable DHCP Server
Select the check box to enable the DHCP server on the LTE4506.
Start IP
The LTE4506 is pre-configured with a pool of 240 IP addresses starting from 192.168.0.10 to
192.168.0.250.
This field specifies the first of the contiguous addresses in the IP address pool.
End IP
This field specifies the last of the contiguous addresses in the IP address pool.
Lease Time (minutes)
Specify how long (in minutes) each computer can use the information (especially the IP
address) before it has to request the information again.
Static DHCP List
Add New
Click
Add Ne w
to create a new entry.
This field displays the index number of the static IP address entry.
IP Address
This field displays the IP address that the LTE4506 assigns to a device with the entry’s MAC
address.
MAC Address
This field displays the MAC address of the device to which the LTE4506 assigns the entry’s IP
address.
Action
Click
Edit
to go to the screen where you can edit the static IP address.
Click
De le te
to remove the static IP address entry.
Apply
Click this button to save your changes back to the LTE4506.
Reset
Click
Re se t
to reload the previous configuration for this screen.
