LTE4506 User’s Guide
50
C
HA PTER
6
Ro ute r
6.1 O ve rvie w
This chapter describes how you can configure the management IP address, DHCP settings of your
LTE4506, the IP filtering and content filtering settings.
The Internet Protocol (IP) address identifies a device on a network. Every networking device (including
computers, servers, routers, printers, etc.) needs an IP address to communicate across the network.
These networking devices are also known as hosts.
6.1.1 Wha t Yo u C a n Do in this C ha pte r
• Use the
LAN IP
screen to configure the LTE4506’s LAN IP address (
Section 6.2 on page 50
).
• Use the
DHC P Se rve r
screen to enable the DHCP server on the LTE4506 (
Section 6.3 on page 51
).
• Use the
DNS Se tting s
screen to configure the LTE4506’s DNS settings (
Section 6.4 on page 53
).
• Use the
C o nne c te d De vic e s
screen to view current clients information (
Section 6.5 on page 53
).
• Use the
IPv4/ Po rt Filte r
screen to view and configure IPv4/Port filtering rules (
Section 6.6 on page 54
).
• Use the
IPv6/ Po rt Filte r
screen to view and configure IPv6/Port filtering rules (
Section 6.7 on page 55
).
• Use the
URL Filte r
screen to view and configure content filtering rules (
Section 6.8 on page 56
).
• Use the
IP/ Po rt Fo rwa rding
screen to view and configure port forwarding rules (
Section 6.9 on page
57
).
6.2 LAN IP Sc re e n
Use this screen to view or configure the management IP address for your LTE4506. To access this screen,
click
Ro ute r > LAN IP
.
Note: If you change the LTE4506’s IP address, you need to use the new IP address to access
the LTE4506’s web configurator.
