ZyXEL Communications LTE3301 Series, Руководство пользователя

Страница: 99 / 192

Chapter 12 Routing
LTE3301 Series User’s Guide
99
Fig ure 64
Network > Routing > Static Route
The following table describes the labels in this screen.
12.2.1 Add/ Edit Sta tic Ro ute
Click the
Add Sta tic Ro ute
button or a rule’s
Edit
icon in the
Sta tic Ro ute
screen. Use this screen to
configure the required information for a static route.
Fig ure 65
Network > Routing > Static Route: Add/Edit
The following table describes the labels in this screen.
Table 42 Network > Routing > Static Route
LABEL DESC RIPTIO N
Add Static Route Click this to create a new rule.
# This is the number of an individual static route.
Status This field indicates whether the rule is active (yellow bulb) or not (gray bulb).
Destination This parameter specifies the IP network address of the final destination. Routing is always
based on network number.
Subnet Mask This parameter specifies the IP network subnet mask of the final destination.
Gateway This is the IP address of the gateway. The gateway is a router or switch on the same network
segment as the device's LAN or WAN port. The gateway helps forward packets to their
destinations.
Modify Click the
Edit
icon to open a screen where you can modify an existing rule.
Click the
De le te
icon to remove a rule from the LTE3301.
Table 43 Network > Routing > Static Route: Add/Edit
LABEL DESC RIPTIO N
Static Route Select to enable or disable this rule.
Destination IP
Address This parameter specifies the IP network address of the final destination. Routing is always
based on network number. If you need to specify a route to a single host, use a subnet mask
of 255.255.255.255 in the subnet mask field to force the network number to be identical to the
host ID.