Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
70
The following table describes the labels in this screen.
7.4 Mo re AP Sc re e n
This screen allows you to enable and configure multiple wireless networks and guest wireless network
settings on the LTE3301.
You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the LTE3301. This allows
you to use one access point to provide several BSSs simultaneously. You can then assign varying security
types to different SSIDs. Wireless clients can use different SSIDs to associate with the same access point.
Click
Ne two rk > Wire le ss LAN > Mo re AP
. The following screen displays.
Fig ure 39
Network > Wireless LAN > More AP
Table 22 Network > Wireless LAN > General: WPA/WPA2
LABEL
DESC RIPTIO N
Security Mode
Select
WPA
or
WPA 2
to enable data encryption.
WPA Compatible
This check box is available only when you select
WPA 2- PSK
or
WPA2
in the
Se c urity Mo de
field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the LTE3301 even when the LTE3301 is using WPA2-PSK or WPA2.
Group Key Update
Timer
The
G ro up Ke y Upda te Tim e r
is the rate at which the AP (if using
WPA- PSK/ WPA2- PSK
key
management) or RADIUS
server (if using
WPA / WPA2
key management) sends a new group
key out to all clients. The re-keying process is the WPA/WPA2 equivalent of automatically
changing the WEP key for an AP and all stations in a WLAN on a periodic basis. Setting of
the
G ro up Ke y Upda te Tim e r
is also supported in
WPA - PSK/ WPA 2- PSK
mode.
Authentication Server
IP Address
Enter the IP address of the external authentication server in dotted decimal notation.
Port Number
Enter the port number of the external authentication server.
You need not change this value unless your network administrator instructs you to do so
with additional information.
Shared Secret
Enter a password (up to 127 alphanumeric characters) as the key to be shared between
the external authentication server and the LTE3301.
The key must be the same on the external authentication server and your LTE3301. The key
is not sent over the network.
Apply
Click
A p p ly
to save your changes back to the LTE3301.
Cancel
Click
C a nc e l
to reload the previous configuration for this screen.
Содержание LTE3301 Series
Страница 10: ...10 PA RT I Use r s Guide...
Страница 40: ...Chapter 4 Tutorials LTE3301 Series User s Guide 40...
Страница 41: ...41 PA RT II T e c hnic al Re fe re nc e...
