ZyXEL Communications LTE3202-M430, Руководство пользователя, Страница: 46 / 117

LTE3202-M430 User’s Guide
46
C
HAPTER
8
WLAN
8.1 Overview
This chapter describes the LTE3202-M430’s WLAN screens. Use these screens to set up your LTE3202-
M430’s wireless LAN connection.
8.1.1 What You Can Do in this Chapter
• Use the WiFi Settings screen to enable the wireless LAN, enter the SSID and select the wireless security
mode ( Section 8.2 on page 47 ).
• Use the MAC Filter screen to deny wireless clients based on their MAC addresses from connecting to
the LTE3202-M430 ( Section 8.3 on page 50 ).
• Use the WPS screen to activate WPS via PBC or PIN configuration ( Section 8.4 on page 51 ).
8.1.2 What You Need to Know
Wireless Basics
“Wireless” is essentially radio communication. In the same way that walkie-talkie radios send and
receive information over the airwaves, wireless networking devices exchange information with one
another. A wireless networking device is just like a radio that lets your computer exchange information
with radios attached to other computers. Like walkie-talkies, most wireless networking devices operate
at radio frequency bands that are open to the public and do not require a license to use. However,
wireless networking is different from that of most traditional radio communications in that there a
number of wireless networking standards available with different methods of data encryption.
Guest WLAN
Guest WLAN allows you to set up a wireless network where users can access to Internet via the LTE3202-
M430 ( Z ), but not other networks connected to the Z . In the following figure, a guest user can access the
Internet from the guest wireless network A via Z but not the home or company network N .
Note: The home or company network N and Guest WLAN network are independent networks.