ZyXEL Communications GS1200 SERIES Скачать руководство пользователя страница 65

Страница: 65 / 85

Chapter 14 Management

GS1200 Series User’s Guide

14.2.1 Firmware Upgrade

Firmware upgrades contain bug fixes and fixes for security vulnerabilities. It is recommended to keep the
Switch’s firmware up to date.

Make sure you have downloaded (and unzipped) the correct model firmware and version to your
computer before uploading to the Switch.

Be sure to upload the correct model firmware as uploading the wrong

model firmware may damage your device.

Do NOT disconnect or turn off power to the Switch while firmware

upload is in progress!

The following message will appear after you click the

Firmware Upgrade

button. You will not be able to

configure other settings during the firmware upgrade process to avoid system crashes on the Switch.
Click

IP Address

Enter the IP address of your Switch in dotted decimal notation, for example, 192.168.1.3. This is
the IP address of the Switch in an IP routing domain.

Subnet Mask

Enter the IP subnet mask of an IP routing domain in dotted decimal notation, for example,
255.255.255.0.

Gateway

Type the IP address of the default outgoing gateway in dotted decimal notation, for example
192.168.1.254.

Apply

Click this button to save your changes for

DHCP Client

IP Address

Subnet Mask

, and

Gateway

to the Switch.

Management
VID

This is the ID number of the management VLAN.

Enter a number between 1 and 4094 as the management VLAN ID.

Apply

Click this button to save your changes for

Management VID

to the Switch.

IEEE 802.3az EEE

Select

Enable

to activate Energy Efficient Ethernet globally. Otherwise, select

Disable

Apply

Click this button to save your changes for

IEEE 802.3az EEE

to the Switch.

Configuration
Restore/Backup

Type the path and file name of the configuration file you wish to restore in the text box or click

path

to locate it.

Restore

Click

Restore

to restore a previously saved configuration from your computer to the Switch.

Note: “config” is the name of the configuration file on the Switch, so your backup

configuration file is automatically renamed when you restore using this screen.

Backup

Click

Backup

to save and store your current Switch settings.

Change Password

Old Password

Type the existing system password (

1234

is the default password when shipped).

New Password

Enter your new system password using keyboard characters (a – z, A – Z, and 0 – 9). The
password must be 8 to 15 characters long

Confirm Password Retype your new system password for confirmation.

Apply

Click this button to save your changes for

Change Password

to the Switch.

Table 16 Switch Management (continued)

LABEL

DESCRIPTION

Содержание GS1200 SERIES






















































































Результаты поиска

Содержание GS1200 SERIES

Отзывы:

ZyXEL Communications GS1200 SERIES, Руководство пользователя, Страница: 65 / 85

Результаты поиска

Содержание GS1200 SERIES

Отзывы: