Zycoo COOFONE-D60, Руководство пользователя

Страница: 49 / 80

Copyright ©ZYCOO All rights reserved. V1.0
45
as you select. For example, if the server is CISCO5300, you need to change to
RFC2543; else phone may not cancel call normally. System uses RFC3261 as default.
Transport Protocol Set transport protocols, TCP or UDP;
Anonymous call Edition Set Anonymous call out safely; Support RFC3323and RFC3325;
Keep Authentication Enable/Disable Keep Authentication System will take the last authentication field
which is passed the authentication by server to the request packet. It will decrease
the server’s repeat authorization work, if it is enable.
Answer With A Single
Codec
Enable/Disable the function when call is incoming, phone replies SIP message with
just one codec which phone supports.
Auto TCP Set to use automatically TCP protocol to guarantee usability of transport as message
is above 1300 byte
Enable Strict Proxy Support the special SIP server-when phone receives the packets sent from server,
phone will use the source IP address, not the address in via field.
Enable GRUU Set to support GRUU
Enable Display name
Quote
Set to make quotation mark to display name as the phone sends out signal, in order
to be compatible with server.
Enable user=phone Enable user=phone by selecting it, it is contained in the invite sip message, in order
to be compatible with server.
Enable Missed Call Log Enable the missed call log by it, the phone will save the missed call log into the call
history record and display the missed calls on the idle screen, or won’t save the
missed call log into the call history record and display the missed calls on the idle
screen.
Click to talk Set click to Talk (need practical software support).
Enable BLF List Enable BLF List by selecting it, BLF list is a function which can monitor the group
status, it is not one to one monitoring, but the information feedback from the
server to decide which BLF list will monitor.
Use VPN Phone use VPN IP to communicate
BLF List Number Specify the BLF List Number.
SIP Global Settings
Strict Branch Enable the Strict Branch, the value of the branch must be in the beginning of
z9hG4k in via field of the invite sip message received, or the phone won’t response
to the invite sip message.
Notice: the deployment will become effective in all sip lines.
Enable Group Enable Group by selecting it, then the phone enable the sip group backup function.
Notice: the deployment will become effective in all sip lines.
Registration Failure
Retry Time
Specify the registration failure retry time, if the phone register failed, the phone will
register again after registration failure retry time.
Notice: the deployment will become effective in all sip lines.