Zycoo COOFONE-D60 Скачать руководство пользователя страница 46

Страница: 46 / 80

Server Port

Set your SIP server port.

Authentication User

Input your SIP register account name.

Authentication Password

Input your SIP register password.

SIP User

Input the phone number assigned by your VoIP service provider. Phone will not

Display Name

Set the display name.

Proxy Server Address

Set proxy server IP address (Usually, Register SIP Server configuration is the same as

Proxy SIP Server. But if your VoIP service provider gives different configurations

between Register SIP Server and Proxy SIP Server, you need make different

settings).

Proxy Server Port

Set your Proxy SIP server port.

Proxy User

Input your Proxy SIP server account.

Proxy Password

Input your Proxy SIP server password.

Domain Realm

Set the sip domain if needed, otherwise this VoIP phone will use the Register server

address as sip domain automatically. (Usually it is same with registered server and

proxy server IP address).

Backup Server Address

Input the Backup Server Address, if the primary server is unavailable, then the

phone will enable the Backup Server Address.

Backup Server Port

Specify the Backup Server Port.

Enable Registration

Start to register or not by selecting it or not.

Codecs Settings

Disable Codecs/Enable

Codecs

Use the navigation keys to highlight the desired one in the Enable/Disable Codecs

list, and press the desired to move to the other list.

Advanced SIP Setting

Forward Type

Select call forward mode, the default is Disabled.

Off: Close down calling forward.

Busy: If the phone is busy, incoming calls will be forwarded to the appointed phone.

No answer: If there is no answer, incoming calls will be forwarded to the appointed

phone after a specific.

Always: Incoming calls will be forwarded to the appoint phone immediately.

The phone will prompt the incoming while doing forward.

Forward Number

Specify the number you want to forward.

No Answer Forward Wait

Time

Specify the No Answer Forward Delay Time, if the Forward Type is No answer,

incoming calls will be forwarded after the no answer forward wait time.

Enable Hot Line

Specify Hot Line by selecting it.

Hot Line Number

Specify Hot Line Number, the phone dial the hot line number automatically at

hands-free mode or handset mode after warm line time.

Warm Line Wait Time

Specify the Warm Line Time.

Transfer Timeout

For the phone supports the transfer of certain special features server, set interval

time between sending “bye” and hanging up after the phone transfers a call.

BLF Server

Ordinary BLF application is that the phone send subscription package to the

registered server, if your server does not support subscription package, please input

the BLF server so that it can separate register server and BLF server

Содержание COOFONE-D60















































































Результаты поиска

Содержание COOFONE-D60

Отзывы:

Похожие инструкции для COOFONE-D60

Бренды по названию

Популярные бренды

Zycoo COOFONE-D60, Руководство пользователя

Результаты поиска

Содержание COOFONE-D60

Отзывы:

Похожие инструкции для COOFONE-D60

Бренды по названию

Популярные бренды