Copyright ©ZYCOO All rights reserved. V1.0
65
8.2.6
Maintenance
8.2.6.1
Auto Provision Settings
ZYCOO endpoint supports PnP and DHCP and Phone Flash to obtain the parameters. The PnP and DHCP and Phone
Flash are all deployed, endpoint will go by the following process to try to obtain the server address and other
parameters, when it boots up:
DHCP option
Auto Provision
Item
Explanation
Auto Update Setting
Current Config Version
Show the current config file’s version. If the version of the configuration
downloaded is higher than the version of the running configurations, the auto
provision would upgrade, or stop here. If the endpoints confirm the configuration
by Digest method, the endpoints wouldn’t upgrade configuration unless the
configuration in the server is different with the running configuration.
Common Config Version
Show the common config file’s version. If the configuration downloaded and the
running configurations are the same, the auto provision would stop here. If the
endpoints confirm the configuration by Digest method, the endpoints wouldn’t
upgrade configuration unless the configuration in the server is different with the
running configuration.
CPE Serial Number
Show CPE Serial Number.
User
Specify FTP/HTTP/HTTPS server Username. System will use anonymous if username
keep blank.
Password
Specify FTP/HTTP/HTTPS server Password.
Config Encrypt Key
Input the Encrypt Key, if the configuration file is encrypted.
Common Config Encrypt
Key
Input the Common Encrypt Key, if the Common Configuration file is encrypted.
Save Autoprovision
Information
Save the username and password authentication message of http/https/ftp and
input ID message in the phone until the url in the server changes.
DHCP Option Setting
DHCP Option Setting
Specify DHCP Option. DHCP option supports DHCP custom option and DHCP option
66 and DHCP option 43 to obtain the parameters. You could choose one method
among them; the default is DHCP option disable.
Custom DHCP Option
A valid Custom DHCP Option is from 128 to 254. The Custom DHCP Option must be
in accordance with the one defined in the DHCP server.
Plug and Play
Enable PnP
Enable PnP by selecting it, than the phone will send SIP SUBSCRIBE messages to a
multicast address when it boots up. Any SIP server understanding that message will
reply with a SIP NOTIFY message containing the Auto Provisioning Server URL
where the phones can request their configuration.
PnP Server
Specify the PnP Server.
PnP Port
Specify the PnP Server.
Содержание COOFONE-D60
Страница 1: ......
Страница 58: ...Copyright ZYCOO All rights reserved V1 0 54 ...