ZURN HYDRO-X Power Serio Series, Инструкция по установке, эксплуатации, обслуживанию и каталог запасных частей

Страница: 6 / 12

FV794 Rev. A 05/21/21
Page 4
2.2. IM assembly only: Connect wye-cable to electronics modules.
2.4. Open battery module using supplied Allen wrench and install
supplied batteries in the electronics module.
2.4a. Optional ACA version: Connect supplied inline connector
and AC adapter.
2.4b. Optional HW6 (Hardwired 6V) version: Connect supplied
inline connector and hardwire adapter. When securing the CWB
wires to the screw terminals on HW6 unit, the BLACK WITH
DASHED MARKINGS should be connected to the Positive (+)
terminal, and the SOLID BLACK wire should be connected to the
Negative (-) terminal.
BLUE (-)
GREE N/YE LLOW
FRAM E/SA FETY GRO UND
P600 0-HW6 WIRING
IN
VAC
(LIN E)
BLAC K
(NEU TRAL)
WHIT E
RED (+)
INLINE
CONNECTOR
-CWB
-HW6
ACA
MJ unit (sold separately)
Note: Do not connect more than 8 solenoids to a single transformer
BLUE (-)
GREE N/YELLOW
FRAM E/SA FETY GRO UND
P600 0-HW6 WIRING
IN
VAC
(LIN E)
BLAC K
(NEU TRAL)
WHIT E
RED (+)
-MJ
-HW6
18 AWG (MIN)
MAX LENGTH 40’
2.3. For battery-powered, non-IM version, connect sensor inline
connector to electronics module and hydrogenerator.