background image

US

 1.855.ONE.ZURN  

CANADA

 

1.905.405.8272

ZURN.COM

ZURN INDUSTRIES, LLC 

511

 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax 919-775-3541

In Canada: 

ZURN INDUSTRIES LIMITED 

7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax 905-405-1292

Rev. A 

Date: 05/21/21   

C.N. No. 143760 

Prod. | Dwg. No. FV794

Sensor-Operated Battery-Powered

Lavatory Faucets

Serio Series™ Faucet

Sensor-Operated Lavatory Faucets  

for Battery or Plug-In Installations.
Installation, Operation, Maintenance, 

and Parts Manual

Patented and Patents Pending

Z6950-XL-S

Z6955-XL-S

Z6950-XL-IM-S*

LIMITED WARRANTY

All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the 

date of purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are 

notified in writing of such defect and the goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly 

maintained and used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages 

whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the 

defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended use and the 

purchaser assume all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantability 

is expressly excluded. If the products sold hereunder are “consumer products,” the implied warranty of merchantability is limited to a 

period of three years and shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and listed 

are approximate and are not guaranteed.

WARNING

: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ADVERTENCIA: 

Cáncer y daño reproductivo - www.P65Warnings.ca.gov

AVERTISSEMENT: 

Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov

NOTE: The information in this manual is subject to change at any time without notice. Installations may 

be performed at different times of construction by different individuals. For this reason, these instructions 

should be left on-site with the facility or maintenance manager.

NOTICE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT.

*HYDRO-X Power not included with integral mixer (IM) faucets.  

Содержание HYDRO-X Power Serio Series













Отзывы: