Zultys ZIP4x4, Руководство пользователя

Страница: 151 / 194

9. The Menu
141
15. An example of a more complex table might be:
This example shows five rows, though in practice the display can show only three rows at
once. As you press Up and Down, the display scrolls through the rows.
The phone defaults to having all ports members of VLAN A. P1, P2, P3, and LAN are
untagged members of the VLAN and the VLAN ID is 1.
When you create another VLAN, the phone defaults to excluding all ports from the other
VLAN. You must then select those ports that will be tagged or untagged members of the
newly created VLAN.
The phone port (Phn) is always excluded from all VLANs except the first (VLAN A), which
is untagged. The phone port is not displayed by the menu.
No port can be an untagged member (U) of more than one VLAN. If you set a port to be an
untagged member of one VLAN and then set it to be an untagged member of a different
VLAN, the phone changes the initial setting to be excluded from the VLAN.
16. Configure the CoS setting (IEEE 802.1p). The phone displays:
Type a number for the setting – the phone will accept an input from the keys 0 to 7. This
setting is used only by the phone port on the switch. Press the Enter button.
The phone does not display this if you have not configured the Phn port to be a tagged
member of VLAN A.
9.6.5 Names and Numbers
When you select Menu | Protected Settings | Names and Numbers, the display shows:
This example shows six rows, though in practice the display can show only three rows at once.
Use the Up and Down buttons or the Up and Down keys to scroll through the various settings.
Press the Enter button to select a parameter.
VLAN A B C
P1
U T E
P2 E T E
P3 T E U
LAN T T T
Phone port L2 CoS
}5
(0 to 7. Default 5)
PSettings | Names
}Device ID
Domain
Voice Mail
Park Extension
Page Extension