Zultys ZIP4x4, Руководство пользователя

Страница: 128 / 194

118
ZIP4x4 User’s Manual
f. H signifies half duplex.
g. F signifies full duplex.
When you display this first screen, the LEDs on the four call buttons display the status of the
Ethernet circuits.
1
a. The LED is solid green to indicate that there is a connection.
b. The LED flashes orange every quarter second to indicate there is activity.
You interpret the LEDs as follows:
a. LED on Call 1 indicates the status of the circuit P1.
b. LED on Call 2 indicates the status of the circuit P2.
c. LED on Call 3 indicates the status of the circuit P3.
d. LED on Call 4 indicates the status of the circuit LAN.
Power. The phone shows if it has power from the ac adapter and power from the LAN,
2
updated
in real time. You should use the ac adapter if you have one, regardless whether the phone can be
powered from the LAN.
TFTP Address. This is what has been configured manually or obtained by DHCP. If the DHCP
server did not specify the TFTP address, the phone indicates this:
Configuration File. Once the phone obtains the address of the TFTP server, it tries to retrieve its
configuration file from the TFTP server. It reports whether the file was read correctly or not:
1. Do not confuse the use of the LEDs in this mode with the four call appearances. The call appearances all take place over
the circuit labelled LAN.
2. The power over the LAN is also referred to as power over Ethernet, PoE.
Information | Comms
}Power
AC = on; LAN = off
Information | Comms
}TFTP Address
192.168.1.100
Information | Comms
}TFTP Address
not found
Information | Comms
}Configuration file
OK
Information | Comms
}Configuration file
not found