Zultys MX250, Руководство по оборудованию

Страница: 35 / 62

31
C h a p t e r 6
Connecting, Wiring, and Configuring
6.1 Introduction
This chapter describes the following procedures:
•
installing the batteries that power the real time clock
•
configuring the IP addresses on the MX250
•
connecting the MX250 to your networks
•
configuring the MX250
6.2 Installing Batteries for Real Time Clock
Before installing the MX250 chassis into the network rack, you must install two AAA batteries into
the fan tray to power the real time clock on the MX250. The position for these batteries is on the
fan tray shown in figure 6-1. To install the batteries:
1. Ensure power is not applied to the MX250.
2. Locate the removable fan tray (item 17 in figure 3-2) on the rear side of the MX250.
3. Unscrew with a screwdriver the captive retaining screw on the face plate.
4. Gently slide the fan tray out of the MX250 chassis.
5. Locate the plastic battery slots between the fans. Identify the battery polarity markings.
Figure 6-1 Fan Tray on MX250