Zultys MX250, Руководство по оборудованию

Страница: 11 / 62

7
C h a p t e r 2
Receiving the Equipment
2.1 Initial Inspection
When the shipment of your MX250 system arrives, inspect the shipping boxes for external
damage, and record any discrepancies. Save the boxes and packing material in case you need to
ship the system to another facility. Always retain the packing materials if you suspect that part of
the shipment is damaged—the carrier may need to inspect them.
Warning
Do not attempt to use the equipment if it appears damaged. Immediately report
the damage to Zultys or a local Zultys sales representative.
2.2 Shipment Contents
2.2.1 Unpacking Boxes
If the boxes have not been damaged in transit, unpack them carefully. Ensure that you do not
discard any accessories that may be packaged in the same box as the main unit. Take care when
handling the MX250.
Caution
Do not drop or jolt the MX250. The hard disc inside the MX250 is designed for
continuous operation, but is fragile until installed. If you allow the MX250 to receive
a hard knock, you can cause irreversible damage to the hard disc.
2.2.2 Verify Content
Upon delivery of your system, inspect the packing list, and confirm that all items listed on that
note were received. You may not be able to verify delivery of firmware options until after you
install your system. Compare the packing slip with your purchase order.
Ensure that the accessories listed in figure 2-1 are present in the shipment.
Ensure that there are no discrepancies in the shipment and then prepare the site as described in
chapter 4, starting on page 21.