Zultys MX250 Скачать руководство пользователя страница 9

Страница: 9 / 62

1. Introduction

The headings are set in Swiss 721, Bitstream’s version of the Helvetica™ typeface; the copy is set

in Zapf Calligraphic, Bitstream’s version of the Palatino™ typeface; notices are set in Swiss 721 or

News Gothic, Bitstream’s version of the Kingsley-ATF Type Corporation typeface. The drawings

were produced using Adobe Photoshop, Adobe Illustrator, and Microsoft Visio.

1.6

Related Documents

Figure 1-3 shows documents related to the use of the MX250.

1.7

Documentation Feedback

Zultys appreciates any constructive feedback on all our documentation. If you have comments or

error reports on any Zultys documentation, please submit your feedback to:
Technical Publications Department

Zultys Technologies

771 Vaqueros Avenue

Sunnyvale, California 94085 USA

[email protected]

Description

MX Administrators Manual

Using the administration software for configuration and maintenance of the MX250

MXIE User’s Manual

Complete manual on the configuration and use of the client software for the MX250

MXIE User’s Guide

Quick reference on the use of the client software for the MX250

Voice Mail User’s Manual

Complete manual on the configuration and use of voice mail on the MX250

Voice Mail User’s Guide

Quick reference on the use of voice mail on the MX250

BPS12 Hardware Manual

Complete manual on the installation of the BPS12 Battery Power Supply

XRS12 Hardware Manual

Complete manual on the installation of the XRS12 Exchange Redundancy Switch

Figure 1-3

Related Documents for the MX250

Содержание MX250































































Результаты поиска

Содержание MX250

Отзывы:

Похожие инструкции для MX250

Бренды по названию

Популярные бренды

Zultys MX250, Руководство по оборудованию

Результаты поиска

Содержание MX250

Отзывы:

Похожие инструкции для MX250

Бренды по названию

Популярные бренды