ZUG CombairSteamer V2000, Руководство по эксплуатации

Страница: 30 / 72

4 Operation
After 3 minutes without interaction.
– The display goes dark and the appliance switches off automatically (see page
30).
4.22 Switching the appliance off
▸ Press and hold the function button.
– Any running application is ended; if turned on, the timer or heatable appliance
drawer will remain active.
– If turned on, the display lock is deactivated.
– For applications with steam, the steam is eliminated.
– The display goes dark.
–
The appliance is in EcoStandby.
Display after switching off
Depending on the application and settings, the following is shown in the darkened dis-
play.
– The residual heat and the temperature if it is above 80 °C.
– «Do not remove the water tank» after all applications with steam, as long as the wa-
ter system has not been emptied.
4.23 Emptying the water tank
Risk of scalding!
The water in the tank may be hot. If the following appears in the display: «Do not
remove the water tank», the temperature of the residual water is too high and can-
not be pumped back yet. Do not remove the water tank!
For safety reasons, the residual water is only pumped off when it reaches below a
certain temperature.
After switching off the appliance
– the residual water in the boiler is pumped back into the water tank.
– in the display appears: «The water is being pumped off».
Once the water has been pumped off,
▸ Touch the «Open water compartment flap» function button.
– The flap of the water tank compartment opens.
▸ Remove, empty and dry the water tank.
▸ Slot the water tank back into position in the water tank compartment.
▸ Close the water compartment flap manually.
Any application can be started again.
4.24 Appliance tips
Appliance tips provides tips on operating the appliance by topic.
Topics
The following topics can be called up:
30