50 / 61
Identification: MD-AL-GI-00
Rev. 4.0 of 31.01.18 - Application: GID
Manual of 07/06/2019 Rev. 2.1 “User Manual for 1.1K-3K TL”
Inverter type
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “1. Inverter
type” menu. Here you can see the power of the inverter model
Serial number
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “2. Serial
Number” menu. Here you can see the serial number of the inverter.
SW version
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “3. SW
Version” menu. Here you can see the software version.
HW version
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “4. HW
Version” menu. Here you can see the hardware version.
Country
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “5. Country”
menu. Here you can see the country code that has been set.
Power factor
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “7. Power
Factor” menu. Here you can see the value of the power factor.
P(Grid) Feed-in
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “8.
P(Grid)
Feed-in
” menu. Here you can see the value of the set value of the power fed into the grid.
P(f)
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “9. P(f)”
menu. Here you can see the P(f) value that has been set.
Q(v)
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “10. Q(v)”
menu. Here you can see the Q(v) value that has been set.
Service Code
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “11.
ServiceCode” menu. Here you can see the currently installed firmware version.
(D)
Press the “OK” key to enter the “Date and Time” menu.
Press the “Back” key in the main interface and the “Up” or “Down” keys to enter the submenu “4. Date and
Time”, then press “OK” to display the current date and time set on the inverter.
