29 / 61
Identification: MD-AL-GI-00
Rev. 4.0 of 31.01.18 - Application: GID
Manual of 07/06/2019 Rev. 2.1 “User Manual for 1.1K-3K TL”
Figure 26 - AC Output Connector
Cable connection procedure
1)
Identify the suitable cables as shown in table 2 and remove an appropriate length of the protective
sheath, as shown in the figure (A: 30~50 mm B: 6~8 m).
Figure 27 – Connecting the AC output cables (1)
2)
Disassemble the AC connector as shown in the figure below; insert the AC output cable (with its stripped
insulation layers as shown in step 1) through the PG waterproof cable gland.
Figure 28 – Connecting the AC output cables (2)
3)
Connect the AC power cable according to the following criteria:
•
Connect the ground wire (yellow-green) to the terminal labelled “PE”, and tighten the cable with an
Allen key;
•
Connect the line wire (brown) to the terminal labelled “L”, and tighten the cable with an Allen key;
•
Connect the neutral wire (blue) to the terminal labelled “N”, and tighten the cable with an Allen key;
