ZXV10 ET301 User Guide
Figure 4-1 Configuration Wizard — Network Configuration
Note:
l
If necessary, you can skip a step temporarily.
l
The default setting is
(wired). When the IP address is obtained and no
operation is performed in five seconds, the system automatically saves the setting
and proceeds to the next step, press any key to cancel.
l
To configure the network connection, select
> Network > Ethernet
. For
details, refer to
4.1.2 Configuring a Network Connection
2.
Click
Next
, press
OK
key, switch to the
Cloud selection
tab, as shown in
, Configure the cloud service parameters. For details about the parameters, refer
to
4.1.3 Configuring the SIP Conference Cloud Service4.1.4 Configuring the H.323
.
4-2
SJ-20190419091840-001|2019-04-08 (R1.0)
ZTE Proprietary and Confidential
