Chapter 4 Service Configuration
Parameter Description
Parameter
Description
{
group-name
}
Group names, including IEEE-reserved1, IEEE-reserved2, ZESR,
loopdetect, arp-reply, 802.1x, IGMP, DHCP, VBAS, PPPoE+,
arp-request, sFlow, UDLD, IPv4,CFM, and route.
<
0-800
>
Protocol rate limit value.
Example
The following example sets the rate limit of the ZESR protocol per second to 100:
zte(cfg)#set protocol-protect limit zesr 100
4.33.5 set protocol-protect priority
Purpose
This command sets the PP priority.
Command Mode
Global configuration mode
Syntax
set protocol-protect priority
{
protocol-name
|
all
}{<
0-7
>|
default
}
Parameter Description
Parameter
Description
{
protocol-name
}
Protocol names, including 802.1x, arp-reply, arp-request, DHCP,
DHCPv6, EOAM, GM, GVRP, IGMP, IP, IPv6, LACP, LLDP,
loopdetect, MLD, PPPoE+, STP, UDLD, VBAS, and ZESR.
all
All supported protocols.
<
0-7
>
Priority value.
default
Restores the default configuration of the packet priority.
Example
The following example sets the packet priority of the ZESR protocol to 5:
zte(cfg)#set protocol-protect priority zesr 5
4-507
SJ-20130731155059-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
