Chapter 5
ZXR10 2800-3E Chassis
The ZXR10 ZSR V2 serial routers have a structure designed based on modularization. The
boards and components support online hot swapping and have a flexible expendability.
A ZXR10 2800-3E chassis is composed of a subrack, a backplane, a controlling and
transferring unit, line interface boards, power modules, and fan modules.
The ZXR10 2800-3E subrack has a sheet metal structure. Wherein the controlling and
transferring unit and fan modules are fixed on a ZXR10 ZSR V2 router, the service board
and power modules are installed at the back, cables are led out from the back, and three
line interface boards can be installed. The entire ZXR10 2800-3E chassis has a standard
width of 19" and can be installed into a standard IEC297 cabinet or an
cabinet.
A ZXR10 2800-3E(G) submodel can be derived from a ZXR10 2800-3E chassis by
expanding the wireless function module. The ZXR10 2800-3E(G) submodel has a 3G or
LTE module inside and a slot for a SIM card on the panel, supporting a GSM, WCDMA,
TD-SCDMA, or LTE network.
Table of Contents
5.1 Structure
5.1.1 Overview and Structure
Overview
A chassis of a ZXR10 2800-3E router has a height (without the antenna) of about 1 U
(1U=44.45 mm), and a dimension of 442 mm × 44 mm × 440 mm (width × height × depth).
For its components and descriptions, refer to
.
Table 5-1 Main Components of a ZXR10 2800-3E Chassis
Component
Description
Controlling and transferring
board
Integrated on the router and cannot be plugged or unplugged.
Boards
The ZXR10 2800-3E chassis provides three slots for line interface
boards.
Power modules
The ZXR10 2800-3E chassis provides two slots for one or two
power modules.
5-1
SJ-20150204153047-004|2015-03-30 (R1.0)
ZTE Proprietary and Confidential