Zte ZXMW NR8120A, Руководство по обслуживанию

Страница: 37 / 48

Chapter 3 Fault Locating Methods
For a description of the query result, refer to the following table.
Parameter Description
Valid Result 1 indicates that the result is valid while 0 indicates that the result is
invalid. An invalid result indicates that unknown errors occur during the
calculation process, causing the result invalid. Normally, the displayed
query result is valid.
Source MP ID Displays the MP ID configured for the end where the loopback test
transmit function is initiated.
Destination MAC Displays the MAC address configured for the end where the loopback
test receive function is initiated.
Number of Sending LBM Displays the total number of LBM packets sent in the test.
Number of Receiving LBR Displays the total number of LBM packets received in the test. Normally,
the destination end returns an LBR packet to the source end every time
it receives an LBM packet. According to Number of Sending LBM
and Number of Receiving LBR , users can determine whether the link
between the source end and the destination end is normal.
Start Time Displays the starting time of the test.
End Time Displays the ending time of the test.
e. Select an MP record, and click the Linktrace button.
After an MP in the link receives the LTM packet, it will return the LTR packet to
the transmit end. The query result of this function displays the information of each
LTR received at the local end, and at most 20 records can be displayed. Figure
3-11 shows an example of the query result that one LTR packet is received.
Figure 3-11 CFM Function Result Pane - Linktrace Button
For a description of the query result, refer to the following table.
3-11
SJ-20150804150350-006|2015-09-17 (R1.0) ZTE Proprietary and Confidential