Zte R800, Руководство пользователя

Страница: 31 / 87

R800
HANDBOOK
26
not required, it can be omitted; WEP mode is not safe enough,
therefore WPA mode is recommended.
 Unencrypted
 WEP open authentication

WEP shared key

WPA

WPA2

WPA/WPA2
WEP Encryption (Wired Equivalent Privacy, providing protected capability equivalent to wired LAN)
Use password pair Choose the needed password pair.
Drop-down box options

Password 1

Password 2

Password 3

Password 4
Password 1 The first pair of password
Alphabet, umber and word type, fixed as 5 bytes. See
“
A Parameter
Specifications
”
for specifications of input.
Password 2 The second pair of password
Alphabet, umber and word type, fixed as 5 bytes. See
“
A Parameter
Specifications
”
for specifications of input.
Password 3 The third pair of password Alphabet, umber and word type, fixed as 5 bytes. See “ A Parameter
Specifications
”
for specifications of input.
Password 4 The forth pair of password
Alphabet, umber and word type, fixed as 5 bytes. See
“
A Parameter
Specifications
”
for specifications of input.
wpa/wpa2 (WiFi Protected Access)
Algorithm Algorithm used for encryption

tkip

aes

Combination of tkip and aes
Drop-down box option

Auto
Mandatory use of CCMP （ AES ） encryption

Mandatory use of TKIP encryption
 TKIP&CMCP
（
AES
）
combined encryption
WPA shared key
WLAN encryption key
，
for connection with
specified SSID
Alphanumeric, WORD
。
When the working mode is client, R800 LTE Router will automatically match the way of encryption based on
the selected AP (in consistent with AP encryption); for shared key, it is necessary to fill in the key connecting AP.
5.2.2.5 DHCP S
ERVICE
C
ONFIGURATION
DHCP Service
DHCP (Dynamic Host Configuration Protocol) is a LAN network protocol and works with UDP protocol. Once DHCP function is
enabled, the lower computer can obtain dynamic IP automatically, which saves the trouble of changing local IP once the gateway
changes.
Step 1: Login to WEB configuration interface of R800 LTE Router. Please refer to
“
5.2.1 Login to WEB Configuration Interface
”
.
Step 2: Click
“
Network Configuration > DHCP Service
”
. Open the tab
“
DHCP Service
”
, see Figure 5-2-10.