Zte R800, Руководство пользователя

Страница: 27 / 87

R800
HANDBOOK
22
Figure 5-2-5 Advanced Configuration Page
Table 5-2-4 “ Mobile Network ” Advanced Configuration
Parameter Description Configuration
Protocol Auto/PPPD Auto is the common selection, router will choose dial protocol by
auto-negotiation ， PPPD can be a forced choice when necessary.
Priority network system The network priority
sequence of registration
Auto-negotiation under common circumstance, if specified network is required,
please pull down to select the corresponding one,
5.2.2.4 WLAN C
ONFIGURATION
R800 LTE Router provides AP mode and client mode. With the former, R800 LTE Router can provide you with LAN hotspot for
Internet access, which saves the trouble of connections. With the latter, you can have R800 LTE Router connected with other device,
so that the lower computer of R800 LTE Router can have access to outer net through the connected AP device.
Step 1: Login to WEB configuration interface of R800 LTE Router. Please refer to
“
5.2.1 Login to WEB Configuration Interface
”
.
Step 2: Click
“
Network Configuration > WLAN
”。
Open
“
WLAN Configuration
”
tab, see Figure 5-2-6. When different WLAN operating modes (AP, client) are selected, the
presented page are shown in Figure 5-2-7 and Figure 5-2-8. When WLAN operating mode selects client mode, the surrounding AP
will be scanned to select one AP access point. See Figure 5-2-9.