Chapter 1 Product Overview
�
FE optical interface contains the multi-mode optical inter-
face and single-mode optical interface. It is connected to
the
through dedicated fiber pigtail by using the
optical module. For the multi-mode optical interface, the
typical transmission distance is 2 km, meeting the medium
distance demands. For the single mode optical interface,
the typical transmission distance is 15 km, meeting the long
distance demands.
�
GE optical interface contains the multi-mode optical inter-
face and single-mode optical interface. By using LC optical
connector, it is connected to the ODF through dedicated
fiber pigtail. For the multi-mode optical interface, the typ-
ical transmission distance is 500 m, meeting the short dis-
tance demands. For the single mode optical interface, the
typical transmission distance is 10 km, meeting the long
distance demands.
�
EPON interface
EPON interface complies with the
Std802.3ah standard. A
typical EPON system consists of
,
, and POS. Both the
upstream and downstream rate can reach up to 1.25 Gbps.
�
GPON interface
GPON interface uses the point-to-multipoint architecture and
the passive fiber transmission mode. The downstream rate can
reach up to 2.5 Gbps. The upstream rate can reach up to 1.25
Gbps.
Network
Interfaces
FSAP 9800 provides multiple network interfaces such as FE inter-
face, GE interface, 10GE interface, and ATM interface.
�
FE interface
FSAP 9800 supports FE electrical interface, FE single-mode op-
tical interface, and FE multi-mode optical interface. FE inter-
face is connected to an upper-layer device. It can also be used
for FSAP 9800 inter-shelf cascade.
�
GE interface
FSAP 9800 supports GE electrical interface, GE single-mode
optical interface, and GE multi-mode optical interface. GE in-
terface is connected to an upper-layer device. It can also be
used for FSAP 9800 inter-shelf cascade.
�
10GE interface
FSAP 9800 supports 10GE single-mode optical interface and
10GE multi-mode optical interface.
10GE interface is con-
nected to an upper-layer device to meet the high bandwidth
requirements by the EPON/GPON access.
�
ATM interface
FSAP 9800 provides various ATM interfaces for cascade or up-
link, involving:
�
interface: E1/T1 interface
�
-1/OC3 interface
Management
Interfaces
FSAP 9800 control and switching card provides multiple manage-
ment interfaces for local and remote maintenance.
�
Maintenance serial port
Confidential and Proprietary Information of ZTE CORPORATION
7