ZPA Pecky, a.s. Modact MOKP 100 Ex Series, Руководство по сборке и эксплуатации

Страница: 34 / 48

34
Threaded holes for cable entries are marked M20x1,5 or M25x1,5 in accordance with article 13 of ČSN EN 60079-1.
These entries are sealed by plugs M20x1,5 or M25x1,5.
The customer is obliged to establish electrical connection for direct entry to the flameproof enclosure, that corresponds
to the requirements of ČSN EN 60079-14 and the protective enclosure is at least IP67.
At the customer's request, the manufacturer can supply motors with cable bushing system that meets the requirements
of ČSN EN 60079-14 Article 10.4.2.d for direct entry into flameproof enclosure of group IIC. For entry into actuators
flameproof enclosure are used certified sealed bushings appropriate sizes.
ICG 623/A M20x1,5; cable diameter 11,0 – 14,3 mm
ICG 623/B M25x1,5; cable diameter 13,0 – 20,2 mm
Dimensional sketch of
MODACT MOKP 600 Ex
electric actuators
Cable bushing M20x1,5
2x cable bushing M20x1,5
for version with BMO
Block of local control (BMO)
Not applied for version with BMO
463
362
346
264
72
80
403
400
ø 250
125
2x cable bushing M25x1,5