2
2. Camera Mounting Spots
3. Adjust the Camera
4. Wired connection
Adjust the camera to the position you want .
The neck of the stand attached to the mounting base, rotate the stand
by loosening the radial joint locking ring. Once in position ,tighten the
ring again.
Tips:
1. If you want the camera to work wirelessly, use Match Code to add camera to NVR. See the Point 5 about Add camera by
match code.
2. If you want the camera to work wired, use Auto Add. This requires you hard wire the cameras to router to get it work.
If camera mounting spot is out of WiFi range, you need to connect cameras to NVR with wired cable to get image.
1
2
1
2
2.1 Mount the cameras anywhere within the Wi-Fi range, plug the power adapters to the camera (Smaller one is for camera).
2.2 The cameras should start to stream videos to NVR within 1 minute.
2.3 If it does not display video,maybe caused by too many obstacles or too long distance to connect NVR's WIFI . Please try
to move the cameras closer to the NVR.
4.1 Use standard Network cables to connect the cameras to the Router
4.2 After connecting the camera to the router,please right click the mouse > go to “Video Manage” > click “Refresh” > click “Auto
Add” .The camera will be added to NVR,and the screen will display video.
Router
Network cables
Network cables
Camera
NVR
Step 1: Connect the NVR to the Internet
Connect the NVR’s WAN port to LAN port of your router with an Ethernet cable. When the NVR is connected to the Internet,
within minutes you shall see the Cloud ID and status shows "ONLINE" on the right bottom corner on your screen.
Network Video Recorder
Network Video Recorder
Network Video Recorder
Network Video Recorder
Cloud ID:662023312 ONLINE
2. View on Smartphone
Tips:
If the status does not show“ONLINE”, please go to System Setup > Network Setup> enable the DHCP or manually allocate
IP for the NVR. If the setting still doesn't work, please ask your network administrator for help. (Ex.: port 80 need to be
opened on the router.)