9
5. Add Camera by Matching Code
1. When you use Match Code
1.1 Add new add-on cameras to your system.
1.2 Re-pair camera to NVR when camera cinnection failed. You need to delete the Network Unreachable channel at first, then
re-pair the camera to an unoccupied channel. (The status of unoccupied channel always shows No Video Source .)
Tips:
IP cameras in pre-packed kits have already been paired to NVR. So cameras will auto connect to NVR once they are
plugged in power.
2.3 Click “Refresh”>Find camera’s IP>Click” Match Code”>Click “Yes”.The NVR will start to match code to the camera.
2.2 Right-click mouse in the blank of main interface, select “Video Manage”.
Network cables
Camera
NVR
2.1 Power on the camera which has no video and connect this camera to the NVR through Network cable
2. Add camera by matching code.
