Zoomlion ZRT850 Скачать руководство пользователя страница 31

Страница: 31 / 179

Operator’s Manual for Rough Terrain Crane

M. Put the boom point directly above the load.

N. Be sure that the load hangs freely.

4.3.10 OPERATION SETUP

A. Be sure the load-bearing surface can hold the weight of the crane and load.

B. Make each crane level, examine frequently, and re-level them when necessary.

C. Assemble barricades to keep personnel out of the load move radius.

4.3.11 POWER LINE SAFETY

A. Find power lines in the area before you start a task. Follow national and local regulations

when you operate around power lines.

B. Do not remove the material from below power lines if the boom or crane can touch the

lines.

C. Do not let the crane or load touch electrical lines. Do not go near the minimum permitted

clearance for operation of a crane near electrical lines.

D. If you touch the electrical lines, stay on the crane until the boom moves off the lines or until

the power line current is off. If you must move from the crane, JUMP, DO NOT STEP OFF.

Jump with feet together.

E. Keep all personnel off the crane if it touches power lines.

F. Use a signal person when you operate around power lines.

4.3.12 SLIP AND FALL PREVENTION

A. Make sure that you stop the crane before you move on and off the equipment. Do not

jump.

B. Do not use the controls and the steering wheel as hand holds.

C. Keep the equipment clean and dry.

D. Replace all broken ladders.

E. Keep the non-slip surfaces in good condition.

F. Wear a safety harness when you climb the counterweight and attach the harness in the

necessary points. Do not walk on the boom!

4.3.13 TRAVEL

A. Be careful when you move cranes on or off the job-site.

B. Look for personnel, power lines, low or narrow clearance, bridge or road load limits, steep

hills, or rough terrain.

C. Correctly stow the boom before you move the crane.

D. Inflate the tires to the specified pressure.

E. Move slowly and prevent sudden movement.

F. Wear seat belt correctly when you move the crane.

G. Make sure that the travel surface can hold the weight of the crane and load.

H. Always use the park brake when you park the crane.

ZRT850 Rough Terrain Crane

4-5

Содержание ZRT850




















































































































































































Результаты поиска

Содержание ZRT850

Отзывы:

Бренды по названию

Популярные бренды

Zoomlion ZRT850, Руководство оператора

Результаты поиска

Содержание ZRT850

Отзывы:

Бренды по названию

Популярные бренды