Zoomlion ZRT850, Руководство оператора

Страница: 149 / 179

起
重
机
说
明
Operator’s Manual for Rough Terrain Crane
O
pe
rat
ing
Inst
ru
ctio
ns
7.19.1 MOVE THE CRANE TO A JOB-SITE
A. Do the items that follow before you move the crane:
(1) Start the engine.
(2) Idle the engine for at least 5 minutes.
(3) Engage the swing lock.
(4) Apply the service brake.
(5) Release the park brake.
(6) Move the gear selector to the “F1” position.
Note:
Make sure that you use the correct transmission gear when you move on rough
terrain.
B. The crane operates in the off-road conditions. If necessary, you can move the crane
on general roadways. Under this condition, you must obey the traffic regulations set
by the government for heavy-duty equipment driving on the public roads. The crane
must hold the items that follow:

Lights

Flares

Flags

Safety equipment.
CAUTION
When you move the crane on hard surfaces, shift the transmission to high-speed
range (2-wheel drive). If not, the crane can be damaged.
CAUTION
When you move the crane, make sure that you are in the correct gear for the type of
travel. When you use the incorrect gear, you put too much load on the crane. The
transmission oil temperature must be between 180°F and 199.4°F (82.2°C and
93.3°C).
When the oil temperature is more than 250.3°F (121.1°C), stop the crane immediately.
To decrease the temperature: move the gear selector to the “N” position. Operate
the engine at an RPM range between 1000 r/min. to 1200 r/min. In this way, the oil
temperature will decrease in a short interval of time immediately. If it does not, you
must examine the crane for different malfunctions. DO NOT stop the engine when
the transmission oil temperature is too high.
7-51 ZRT850 Rough Terrain Crane