Zoomlion ZRT850, Руководство оператора

Страница: 23 / 179

起
重
机
说
明
Operator’s Manual for Rough Terrain Crane
Intr
od
uc
tio
n
3.3 ABOUT THIS MANUAL
General
The data (data, specifications, illustrations) in this manual is for cranes in production at the time
of this manual’s publication. We reserve the right to make changes to this manual at any time,
without obligation.
This manual contains the instructions to move and operate the crane in the field. Follow the
operation and maintenance procedures to make sure that your machine operates at MAXIMUM
EFFICIENCY. Use the CRANE PERIODIC INSPECTION CHECKLIST. Keep a maintenance
log to monitor all maintenance work on the machine.
An example of a Maintenance Log and Crane Periodic Inspection Checklist is at the beginning
of this section.
Again, we at Zoomlion appreciate your selection of our crane. User safety is most important. To
complete on-site tasks safely, operators must be responsible. Obey the instructions that follow:

Comply – with Occupational Safety and Health Administration (OSHA), Federal, State,
and Local Regulations.

Read, Understand, and Follow – the instructions in this and other manuals and
documents that come with the crane.

Use Good, Safe Work Practices – in a common sense way.

Only have trained operators – directed by informed and knowledgeable job-site
supervisors.

Do not use this crane – before the portable fire extinguisher, installed in the cab, agrees
with local fire protection rules.
Note:
OSHA prohibits the alteration or modification of this crane without written manufacturer’s
approval. Use only factory approved parts to service or repair the crane.
The operator must comply with the requirements that apply, as follows:

OSHA 1926:1412 (Inspections)

OSHA 1926.1413 (Wire rope – inspection)

OSHA 1926.1414 (Wire rope – selection and installation criteria)

OSHA 1926:1417 (Operation)

OSHA 1926:1418 (Authority to stop operation)

OSHA 1926:1422 (Signals – hand signal chart)

OSHA 1926:1423 (Fall protection).
Speak with us if special data is necessary for the maintenance or operation of your crane. Send
your machine model and a serial number to make sure that you receive the correct data.
If there is anything in this manual that is not clear or which you think is necessary, write to the
address that follows:
ZRT850 Rough Terrain Crane 3-3