For information on the MIDI channel setting procedure, see page
47.
The RhythmTrak
•••
234 produces sound according to the note
numbers received via the [MIDI IN] connector. Program change
messages can be used to switch drum kits and bass programs of
the RhythmTrak
•••
234. For information on program change
numbers and corresponding drum kits and bass programs, please
refer to the "Reference" section at the end of this manual.
51
RhythmTrak
•••
234
Application
Examples
Using a MIDI sequencer, MIDI keyboard, or similar MIDI Device you can play the built-in sound
sources of the RhythmTrak
•••
234.
Using MIDI equipment to play the RhythmTrak
•••
234
STEP/MEASURE
VALUE
MEASURE
BEAT
SONG/PATTERN
OPEN HAT
7
CLICK VOL
CLOSED HAT
5
PRE COUNT
SNARE
3
BASS TUNE
KICK
1
BASS KEY
EXTRA 1
9
CTRL ASSIGN
EXTRA 2
11
PAD SENS
EXTRA 3
13
MIDI
TOM 3
6
QUANTIZE
TOM 2
4
TIME SIG
RIDE
10
SWING
EXTRA CYMBAL
12
SHIFT
TOM 1
2
MIX
CRASH
8
BAR LENGTH
REPEAT/STEP
FUNCTION
DELETE
/ERASE
INSERT
/COPY
TEMPO
TAP
II
EXIT
STEP
PAUSE
STOP
SONG
PATTERN
REAL-TIME REC
Groove PLAY
MODE
–
+
–
+
SOLO
MUTE
JAM
FUNCTION
SOUND CHANGE
VOLUME
PITCH
DRUM A
DRUM B
DRUM C
BASS
SOUND
JAMMER
2
2
STEP
1
Connect the MIDI OUT jack of the MIDI sequencer or other MIDI component to the
[MIDI IN] connector of the RhythmTrak
•••
234, using a MIDI cable.
STEP
2
Use the [FUNCTION] key and pad 13 (MIDI) to assign the tracks of the RhythmTrak
•••
234 to receive MIDI channels which are matched to the send channels of the
external MIDI component.
STEP
3
Play the MIDI sequencer or keyboard.