The [REC] key LED goes out, and song recording stops. The song
position returns to step 1.
The [START] key LED lights up and the song is played back. The
[TEMPO] key LED flashes according to the tempo of the song.
During playback, the [VALUE] display shows the current step
number, and the [SONG/PATTERN] display shows the song
number.
Pressing the [PATTERN] key during playback causes the [VALUE]
display to show the number of measures since the start of the
song.
The LED goes out and the song returns to the start position.
By pressing the [START] key again, you can start playback of the
song again from the beginning.
36
Creating
S
ongs
(Song
M
ode)
STEP
10
To listen to the song, press the [START] key.
• By performing step 2 during playback, you can switch to the
next song without stopping play.
• Pressing the [VALUE UP] key during pattern playback turns off
the sound of tracks other than the currently selected track
(whose [KIT/TRACK SELECT] LED is lit).
• Pressing the [VALUE DOWN] key turns off the sound of the
currently selected track.
HINT
HINT
STEP
11
Press the [STOP] key when wishing to terminate playback.
Pressing the [START] key instead of the [STOP] key causes the
PAUSE LED to flash, and playback is paused. To resume playback
from the same point, press the [START] key once more.
HINT
HINT
Also during playback of a song, you can use the pads for manual play.
However, modifications made with the [SOUND JAMMER] slider
have no effect on the playback sound of the song.
NOTE
When you select an empty pattern that you have already deleted
per the procedure described on page 18, the BASS KEY, MIX, kit
number, and bass program will use the settings that were obtained
before you deleted the pattern. TIME SIG will be set to "4" and
BAR LENGTH will be set to "2".
If you play back a song that includes an empty pattern step, the
playback will stop at the empty pattern step.
If a song includes a rest, not an empty pattern step, the song will
continue playing after the rest pattern.
You can create a rest pattern by pressing the [REC] key in an
empty pattern. A rest pattern stores the settings of the track BASS
key (only for the bass track), MIX, TIME SIG, BAR LENGTH, and
kit number/bass program when you press the [REC] key.
NOTE
[START]
II
STEP/MEASURE
VALUE
MEASURE
BEAT
SONG/PATTERN
0 0 1 0 1
Step number
Song number
STEP/MEASURE
VALUE
MEASURE
BEAT
SONG/PATTERN
0 0 0 2 0 4
Measure count
from start of song
Pattern number
STEP
9
When one song is completed, press the [STOP] key.
[STOP]
EXIT
