Zoom RhythmTrak 234, Руководство по эксплуатации

Страница: 16 / 70

With each push of the key, the setting cycles through the following
setting, and the corresponding LED lights up: PITCH
→
VOLUME
→
SOUND CHANGE
→
Out.
• When PITCH is selected: The slider center position is the
reference pitch, and moving the slider shifts the pitch up or
down. The adjustment range depends on the sound type.
• When VOLUME is selected: Moving the slider changes the
volume. The pad tapping intensity has no effect in this case.
• When SOUND CHANGE is selected: In the center position of the
slider, there is no change in the sound. Moving the slider up or
down selects variation 1, variation 2 etc. The available variations
depend on the sound type.
13
Playing
the
Pads
(Manual
Play)
By moving the [SOUND JAMMER] slider while using the pads, you can change the pitch, volume, or
tone continuously.
STEP/MEASURE
VALUE
MEASURE BEAT
SONG/PATTERN
OPEN HAT
7 CLICK VOL
CLOSED HAT
5
PRE COUNT SNARE
3
BASS TUNE
KICK
1
BASS KEY
EXTRA 1
9
CTRL ASSIGN
EXTRA 2
11
PAD SENS
EXTRA 3
13
MIDI
TOM 3
6
QUANTIZE
TOM 2
4
TIME SIG
RIDE
10
SWING
EXTRA CYMBAL
12
SHIFT
TOM 1
2
MIX
CRASH
8
BAR LENGTH
REPEAT/STEP
FUNCTION
DELETE
/ERASE
INSERT
/COPY
TEMPO
TAP
II EXIT
STEP PAUSE STOP
SONG PATTERN
REAL-TIME REC
Groove PLAY
MODE
JAM
FUNCTION
SOUND CHANGE
VOLUME
PITCH
DRUM A DRUM B DRUM C BASS
SOUND
JAMMER
–
+
–
+
SOLO
MUTE
2
1
2
Using the slider (modify function)
STEP
1
Use the [JAM FUNCTION] key to select the sound parameter that you want to
change with the slider.
[JAM FUNCTION]
SOUND CHANGE
VOLUME
PITCH
Out
STEP
2
Tap the pad while moving the [SOUND JAMMER] slider.
[SOUND JAMMER]
PAD
• Only one sound parameter (pitch, volume, or tone) can be
changed at a time. When the parameter is switched, the previous
parameter returns to its original setting.
• When the sound parameter is switched, the slider becomes
active only after passing the position corresponding to the
current value. For example, if the VOLUME parameter is
selected with the slider set to 0, the volume will not become zero
right away. The volume starts to change only after the slider is
moved and has passed the current volume position ([SOUND
JAMMER] slider LED flashes at this point).
• If you have assigned PITCH to the [SOUND JAMMER] slider
on the bass track, moving the slider while tapping the pad will
produce sound with different pitches. Moving the slider from the
bottom to the top will shift the pitch in the same order as the
pitches assigned to pads 1 to 13.
NOTE