manualshive.com logo in svg

Zoom Handy Recorder H4, Руководство по эксплуатации

Поделиться
Скачать
Zoom Handy Recorder H4 Скачать руководство пользователя страница 64

 

Effects

 

ZOOM H4

 

64

 

HINT

 

• The effect settings made in stereo mode are 

saved separately for the stereo mode. When 
you switch to 4-track mode and then return to 
stereo mode later, the previous settings will be 
established again.

• For details about the types and parameters in 

each effect module, see the reference section 
at the end of this manual.

• After switching an effect on or off or changing 

the effect settings, you should adjust the 
recording level again.

• Manufacturer names and product names 

mentioned in this documentation are 
trademarks or registered trademarks of their 
respective owners. The names are used only to 
illustrate sonic characteristics and do not 
indicate any affiliation with ZOOM 
CORPORATION.

 

Using effects in 4-track 

 

mode

 

This section explains how to use effects in 4-

track mode.

 

About effect input/output

 

In 4-track mode, effects are used with mono

input/stereo output. The signal flow differs,

depending on whether one or two input sources

are connected and on whether one or two tracks

are used as recording targets.

 

Selecting a patch

 

I n   4 - t r a c k   m o d e ,   e f f e c t   t y p e s   a n d   e f f e c t

parameters are adjusted for each module and the

result can be stored as a patch. The H4 has a total

capacity for 60 patches, and 50 of these are

already preprogrammed at the factory. This

section describes how to select a stored patch.

 

NOTE

 

In the default condition, the effect section is set to 
off in 4-track mode.

 

1.

 

At the 4-track mode top screen, 

press the bottom of the [MENU] key.

 

The INPUT menu appears.

 

2.

 

Bring the cursor to the “EFFECT” 

item and press the jog dial.

 

The EFFECT menu for selecting effect patches

appears. When a project is in the default

condition, the effect section is off. (In this

condition, the ON/OFF button at the bottom of

the display shows “ON” because it will turn the

effect section on when clicked.)

 

3.

 

Verify that the cursor is on the ON/

OFF button and press the jog dial.

Input 1

Input 1

Input 2

Mono track recording

Effect 
section

Track

Input 1

Stereo track recording

Effect 
section

Track 1 or 3

Track 2 or 4

Track 1 or 3

Track 2 or 4

Effect 
section

Input 1

Input 2

Effect 
section

Track

ON/OFF button

H4_E.book 64 ページ ２００６年９月１日　金曜日　午後７時５６分

Содержание Handy Recorder H4





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды