manualshive.com logo in svg

Zoom Handy Recorder H4, Руководство по эксплуатации

Поделиться
Скачать
Zoom Handy Recorder H4 Скачать руководство пользователя страница 23

 

Quick Guide 2 

 

4-track mode basic operation

 

ZOOM H4

 

23

 

the [MIC GAIN] switch to set the sensitivity to a

suitable level. (For information on recommended

settings, see page 13.)

 

When recording via the [INPUT 1]/[INPUT 2]

jacks, use the [INPUT 1 GAIN] switch or

[INPUT 2 GAIN] switch to set the sensitivity to a

suitable level. For information on recommended

settings, see the table below.

 

●

 

[INPUT 1 GAIN]/[INPUT 2 GAIN] switch 
setting

 

NOTE

 

Note that the signal input to the H4 will be 
distorted if the input sensitivity is not set correctly.

 

2.

 

At the 4-track mode top screen, 

press the bottom of the [MENU] key.

 

The INPUT menu for making various input

related settings appears.

 

3.

 

Move the jog dial up/down to bring 

the cursor to “LEVEL”. Then press 

the jog dial.

 

The screen for adjusting the recording level

appears.

 

HINT

 

• The alphanumeric indication at the left of the 

signal level bars shows the input source (“1” 
and “2” for the [INPUT 1]/[INPUT 2] jacks and 
“L” and “R” for the built-in stereo mic).

• While this screen is being shown, the input 

signal can be monitored via the [LINE OUTPUT] 
jack/[PHONES] jack.

 

4.

 

If two input sources (IN1&2) have 

been selected, move the jog dial up/

down to bring the cursor to the input 

source for which to adjust the 

recording level.

 

5.

 

Press the jog dial to bring up the 

fader icon on the meter display.

 

The recording level can now be adjusted. While

the fader icon is shown, the cursor is not

displayed.

 

6.

 

Adjust the recording level by moving 

the jog dial up/down while sound is 

being produced.

 

The recording level setting can be checked at the

top right. To record with optimum sound quality,

the input signal level should be set as high as

possible, without exceeding the 0 (dB) indication

on the meter. The setting range is 0 – 127. When

 

Setting

Application

 

L

 

For use when an electric guitar or other 
line-output device is connected directly. 
Also used for on-mic recording with a 
condenser mic or other high-output mic 
connected to the balanced input (XLR).

 

M

 

For on-mic recording of vocals or 
instruments from a close range

 

H

 

For off-mic recording with a greater 
distance to instruments or for recording 
an instrument with a low volume level.

Recording level for input 

source selected by cursor

Input signal level

Alphanumeric 
indication of input source

Fader icon

H4_E.book 23 ページ ２００６年９月１日　金曜日　午後７時５６分

Содержание Handy Recorder H4





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды