4-Track Mode
ZOOM H4
60
5.
Adjust the pitch until the
●
indication
is right above the desired note.
6.
To change the reference pitch of the
tuner, proceed as follows.
(1) Move the jog dial up/down to bring the
cursor to the CALIB button, and then
press the jog dial.
The screen for changing the reference pitch
appears.
(2) Move the jog dial up/down to change the
reference pitch.
In the default condition, the reference pitch is
center A = 440 Hz. This can be adjusted over
the range of 435 – 445 Hz, in 1-Hz steps.
When the setting is complete, press the center
of the [MENU] key to close the screen. You
c a n n o w p e r f o r m t u n i n g w i t h t h e n e w
reference pitch.
HINT
The reference pitch setting is saved separately for
each project.
7.
When you have finished using the
tuner function, press the center of
the [MENU] key repeatedly to return
to the 4-track mode top screen.
Using other tuner types
The H4 allows various other tuning types besides
chromatic tuning, including standard tuning for
guitar and bass, and various special tuning
functions.
When using these tuner modes, you specify each
string for tuning separately.
1.
Connect the instrument to tune to
the [INPUT 1] or [INPUT 2] jack and
verify that the correct jack is
selected as input source.
HINT
If you select MIC as input source, it is also
possible to perform tuning using the built-in
stereo mic.
2.
At the 4-track mode top screen,
press the bottom of the [MENU] key.
The INPUT menu for making various input
related settings appears.
3.
Move the jog dial up/down to bring
the cursor to “TUNER”. Then press
the jog dial.
The tuner function is called up.
4.
Move the jog dial up/down to bring
the cursor to the MODE button, and
then press the jog dial.
The TUNER MODE screen for selecting the
tuner mode appears.
Pitch is sharp
H4_E.book 60 ページ ２００６年９月１日 金曜日 午後７時５６分
