95
2.
Install 2 AA batteries in the Ring
Controller (
→
P. 21), and turn on
both the Base Station and Ring
Controller.
After the Ring Controller starts up, an
LED animation will appear and it will be in
connection standby mode.
A list of devices that can be con-
nected will appear on the Base Station
SEQUENCE display.
Press
F
to return to the original
screen.
You can press
F
and
0
-23 to
show this screen again.
3.
Turn
H
in the Base Station
SEQUENCE area to select the Ring
Controller you want to connect,
and press
h
.
The selected Ring Controller will be con-
nected to the Base Station, and all its
pads will flash blue.
A check mark will appear next to the
connected Ring Controller.
NOTE
•
After doing this once, connection will be
automatic in the future.
•
Connecting a Base Station and Ring Control-
ler that have BTA-1 units installed by USB will
automatically pair them.
Ring Controller and Base
Station connection and
disconnection
■
Connection methods
The Base Station and a Ring Controller use a
USB connection to communicate.
If BTA-1 (sold separately) units have been
installed in the Base Station and Ring Controller,
wireless transmission using Bluetooth LE is also
possible.
NOTE
If a Ring Controller and Base Station are con-
nected by USB, they will communicate via the
USB cable even if they both have BTA-1 units
installed.
Likewise, USB will be used for communication
if a Ring Controller with a BTA-1 installed is
connected to a computer by USB.
■
Connecting by USB
1.
Use a USB cable to connect the
Base Station and Ring Controller.
This automatically turns the Ring Control-
ler on.
■
Connecting by Bluetooth LE
Pairing beforehand is necessary to connect
using Bluetooth LE.
1.
Turn off both the Base Station and
the Ring Controller, and Install
BTA-1 units (sold separately) into
both of them.
System settings
Ring Contr
oller settings
Ring Controller settings
