Zontes ZT350T-D, Руководство по обслуживанию

Страница: 142 / 152

142 / 152
Disassembly and assembly of vehicle panel
Caution:
●During disassembly, please pay attention to the force to
prevent breaking the buckle.
●When removing the panels, please remove them in strict
order. Do not forcibly remove the panels to prevent
irreparable damage to the corresponding panels.
●When unplugging the plug, please control the force and
disassembly method. Do not forcibly unplug the plug to
prevent damage to the plug, resulting in poor contact of
harness connector and affecting the function of various
parts.
●When installing the harness plug, please check whether the
harness thimble in the harness male connector is deformed
or misaligned, so as to prevent the harness thimble in the
harness male connector from being damaged during the
installation of the harness plug, thereby affecting the
function of each part.
Windshield removal
a. Remove the 4 decorative buckles on the windshield.
b. Use 4# inner hexagon to loosen the 4 M6×14 bolts on
the left and right decorative covers of the windshield.
c. Take out the left and right decorative covers of the
windshield, the windshield, and the rubber pads of the
windshield bracket in turn.
Removal of the front sun visor
a. Use 4# inner hexagon to remove the 3 swell nails on the
front sun visor.
Removal of the front cover and the front
panel
a. Use 4# inner hexagon to remove one M6×14 bolt on the
front cover. Then use 4# inner hexagon to remove the 4 swell
nails on both sides of the front cover.
b. Raise the windshield rocker arm to the highest position,
grasp the mark of the front cover plate (green rectangle)
with your hand, and pull out in the direction of the small
arrow; After pulling out the mushroom button (red circle) on
one side of the front cover plate, grasp the mark of the front
cover plate (blue rectangle) with your hand, pull out in the
direction of the small arrow, and pull out the mushroom
button (red circle) on the other side of the front cover plate
until all three buttons on the front panel are pulled out.
Remove the front panel together with the front cover.