Zontes ZT350T-D, Руководство по обслуживанию, Страница: 96 / 152

96 / 152
Starting system electrical schematic diagram
Starter motor
Caution:
●If the starter motor is removed for maintenance, replace
the O-ring with a new one and apply a proper amount of
engine oil.
●Our company only sells starter motor assemblies, not O-
rings and motor parts separately. The O-ring has an inner
diameter of φ25mm (0.98in) and a wire diameter of 3mm
(0.12in).
1. Remove the starter motor
a. Refer to the steps of removing the rear storage box to
remove the rear storage box. For the removal steps, refer
to the stepping motor removal and cleaning carbon
deposits in the section of the throttle valve body in the
"Maintenance" chapter.
b. Untie the cable ties and clip.
c. Loosen the clamp bolt shown in the figure with a 4#
inner hexagon counterclockwise, and pull the air filter
outlet pipe toward the rear wheel to pull out the throttle
valve body.