Zontes ZT350T-D, Руководство по обслуживанию

Страница: 150 / 152

150 / 152
d. Use the 4 # hexagonal socket to remove the 1 M6× 14
Shoulder bolt
⑴
at the left of the surrounding base plate
connection; Then use the 4 # hexagonal socket to remove
the 2 expansion nails (2) at the left part of the surrounding
base plate connection.
e. Grasp the surrounding left part and left pedal with both
hands, and take out the surrounding left part and left pedal
in the direction of arrow.
f. Use the same method to remove the surrounding right
part and the right pedal.
g. Use the 4 # hexagonal socket to remove the 4 M6 × 14.
Bolts (1) positions surrounding the left connecting the left
pedal and two expansion nails (2) of the shaft shoulder.
Separate the left pedal from the surrounding left part.
h. Separate the right pedal and the surrounding right part
in the same way.
Disassembly of the surrounding bottom
a. Grasp the rear part of the around the bottom plate by
hand, and pull it back in the direction of arrow until the
bottom plate is taken out.
Removal of the surrounding middle part
Use 4# inner hexagon to remove the two M6×12 bolts
connecting surround middle part and the front storage box
panel and then remove the middle surround.
Radiator Deflector Removal
a. Remove two expansion nails with 4 # hexagonal socket
and take down the radiator deflector.
Disassembly of the rear hand rest
a. Remove the bolt decorative buckle on the bolt, and
remove 6 M6× 12 bolts
⑴
with 4 # hexagonal socket; Use
12 # socket to remove 5 M8 × 25 bolts (4); Remove M6× 14
Shoulder bolt (3) at the connection between the middle part
of the tail skirt and the rear armrest with 4 # hexagonal
socket; Grasp any part of the rear armrest with both hands,
lift the rear armrest up in the direction of the arrow, and
then remove the rear armrest.