FR
EN
PL
NL
ES
PT
18
INSTALLATION
Fence Wire
The anti runaway fence boundary wire must make a continuous loop around your property for the
system to operate. The signal is delivered from the terminal of the transmitter, through the fence
wire, back to the other terminal on the transmitter. When this is accomplished, the wire continuity
light will emit a constant red indicator.
Common Boundary Designs
CAUTION
Before you install your anti runaway fence wire, contact the utility company to mark the utility lines
on your property before you begin digging. Be sure to test your wire layout above ground before
permanent installation begins.
Carefully choose the areas in which you want to contain your dog. A diagram may be helpful in
predicting unforeseen obstacles. (Please refer to the Common Boundary Designs)
IMPORTANT
When creating a Front Boundary Only, anti runaway fence Front Yard Only, or Front Boundary with
Existing anti runaway fence type of containment system a double loop layout is required. THE TWO
PARALLEL WIRES OF THE DOUBLE LOOP MUST BE 6-10 FEET APART to avoid any signal interference.
Single loop systems must also be kept 6-10 feet of distance between the wires as well.
*Please note, the diagrams are not drawn to scale.
Front Boundary Only
Fence Front Yard Only
Front or Back Access
Basic Loop with Garden
Front Boundary with Existing Fence
Double Loop with
Passage
twisted wire
neutral zone
passage
