7
© 2020. All rights reserved.
7.
Reconnect power to the primary sump pump.
AC
POWER
FLOAT
STATUS
BATTERY
DC
PUMP
SILENCE
TEST
24/7 BASEMENT
PROTECTION
USB
RESET
FLOAT
DC
PUMP
FUSE
30 AMP
by
1-800-584-8089
BasementSentry.com
DC POWER
+ 15V DC 1.6A
GFCI Outlet
7
INSTALLATION INSTRUCTIONS
There are two buttons on the front of the controller.
1. Silence/Reset - Can be pressed to silence current
alarms for 24 hours.
Can be held for 3+ seconds to reset (or clear) alarms
and LEDs. Flashing LEDs for conditions such as bad/
disconnected battery or power outage, for example,
can’t be cleared by Silence/Reset. These conditions
must be resolved to eliminate the LED indicator.
BASEMENT SENTRY CONTROLLER FUNCTIONS
SILENCE
TEST
by
FW2065 A
P L U S
AC
POWER
FLOAT
STATUS
BATTERY
DC
PUMP
24/7 BASEMENT
PROTECTION
USB
RESET
FLOAT
DC
PUMP
FUSE
30 AMP
1-800-584-8089
BasementSentry.com
DC POWER
+ 15V DC 1.6A
Test
2
SILENCE
TEST
by
FW2065 A
P L U S
AC
POWER
FLOAT
STATUS
BATTERY
DC
PUMP
24/7 BASEMENT
PROTECTION
USB
RESET
FLOAT
DC
PUMP
FUSE
30 AMP
1-800-584-8089
BasementSentry.com
DC POWER
+ 15V DC 1.6A
Silence/
Reset
1
2. Test - Will run the pump to determine if amp draw of
pump is within range.
Controller is factory programmed to self-test the pump
for several seconds every 7 days. This schedule may
be modifi ed once the controller is connected to the Z
Control Cloud.
Pressing the test button will start the 7 day timer for
self-testing.
Test and Silence/Reset -
Holding both buttons together for about six seconds
will initiate a factory reset. This returns the fi rmware’s
device confi guration to the state in which it left the
factory. Any over-the-air fi rmware updates that have
been installed will be retained.